CeramicSpeed BB92 SRAM DUB MTB Krankboks Coated – Sølv – 105923

Krankboks Ceramicspeed BB92 for SRAM DUB

• Akseldiameter 28,99 mm (Højre side)
• Akseldiameter 28,99mm (Venstre side)
• PressFit ø41 mm
• Stelbredde 86,5 mm
• Coated ceramic lejer
• Sort

Overview:

These bottom brackets are equipped with hand built coated bearings specially developed for off-road performance that offer extreme durability and feature a unique design for SRAM DUB 28.99 cranks.

Coated bearings utilize the highest quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron thick metallic coating making the races corrosion resistant, harder and smoother, increasing service life and reducing friction.

In the box:

• 2 CeramicSpeed Bearings
• 2 dustcovers
• Plast sheet
• 1 x 3mm spacer
• 2 x 1mm spacers
• 10ml syringe of CeramicSpeed Long Life Grease
• Sticker sheet

Tech data:

This product has a unique design specifically for SRAM DUB 28.99 cranks. With native fit frame interface and no plastic adapters or excess spacers. This design features a custom integrated dustcover for maximum durability.

CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That means an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings.

Coated Bearings drop friction further and increase lifespan to applying a coating to the races. The coated races see a 50% drag reduction and an improvement in bearing life of 60%.

LongLife Grease comes installed, but can be changed for lower drag All Round Grease, which is fine for less extreme conditions.

CeramicSpeed Bottom Brackets

The CeramicSpeed Bottom Brackets guarantee you the lowest friction, optimised power transfer, and longest product lifetime, helping you to save watts or ride faster. Fitting almost all standards available on the market, more than 150 types of CeramicSpeed Bottom Brackets are available for upgrading your bike. Choosing to upgrade with a bottom bracket with coated bearings, you benefit from even further reduced friction and better resistance to contamination and corrosion.

CeramicSpeed Bottom Bracket Compatibility

The CeramicSpeed Bottom Brackets covers 99% of all cranks brands and models in the market, from Shimano to SRAM and Campagnolo. Some of the latest additions to the CeramicSpeed Bottom Bracket product range are the SRAM DUB compatible Bottom Brackets that covers almost all compatibilities. 

Bottom Brackets for road, MTB and triathlon

No matter the discipline, there’s a CeramicSpeed Bottom Bracket that fits. The Bottom Brackets come in both road, tri and MTB specific variants. Use the CeramicSpeed Bottom Bracket Fit Finder to find the right fit for your specific crank. Among the CeramicSpeed Bottom Brackets specifically designed for MTB cranks are CeramicSpeed BSA30 MTB, CeramicSpeed PF4630 MTB, PF30 for Shimano MTB, PF30 for SRAM GXP MTB and many more. 

Coated Bottom Brackets for even better performance

All of the CeramicSpeed Bottom Brackets come in a coated version for even longer lifetime and lower friction. The coating on the Bottom Brackets is a thin metallic layer that is 75% harder than the hardened-steel races and which offers an even better performance than the non-coated CeramicSpeed Bottom Brackets. 

Bottom Bracket installation

If you need advice on how to install your CeramicSpeed Bottom Bracket, then please go to the support page. Here you can find videos on how to install both crank and bottom bracket and get answers to your tech related questions. 

Maintenance of your CeramicSpeed Bottom Bracket

For guidance on how to maintain and clean your CeramicSpeed Bottom Brackets, please go to the maintenance page. Here you can also find a guide on how to maintain CeramicSpeed Bearings to make sure they keep performing.